How to compile GlusterFS RPMs from git source, for RHEL/CentOS, and Fedora

Creating rpm's of GlusterFS from git source is fairly easy, once you know the steps.

RPMS can be compiled on at least the following OS's:

  • Red Hat Enterprise Linux 5, 6 (& 7 when available)
  • CentOS 5, 6 (& 7 when available)
  • Fedora 16-20

Specific instructions for compiling are below. If you're using:

  • Fedora 16-20 - Follow the Fedora steps, then do all of the Common steps.
  • CentOS 5.x - Follow the CentOS 5.x steps, then do all of the Common steps
  • CentOS 6.x - Follow the CentOS 6.x steps, then do all of the Common steps.
  • RHEL 6.x - Follow the RHEL 6.x steps, then do all of the Common steps.

Note - these instructions have been explicitly tested on all of CentOS 5.10, RHEL 6.4, CentOS 6.4+, and Fedora 16-20. Other releases of RHEL/CentOS and Fedora may work too, but haven't been tested. Please update this page appropriately if you do so. :)

Preparation steps for Fedora 16-20 (only)

​1. Install gcc, the python development headers, and python setuptools:

    $ sudo yum -y install gcc python-devel python-setuptools

​2. If you're compiling GlusterFS version 3.4, then install python-swiftclient. Other GlusterFS versions don't need it:

    $ sudo easy_install simplejson python-swiftclient

Now follow through the Common Steps part below.

Preparation steps for CentOS 5.x (only)

You'll need EPEL installed first and some CentOS specific packages. The commands below will get that done for you. After that, follow through the "Common steps" section.

​1. Install EPEL first:

    $ curl -OL https://download.fedoraproject.org/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm
    $ sudo yum -y install epel-release-5-4.noarch.rpm

​2. Install the packages required only on CentOS 5.x:

    $ sudo yum -y install buildsys-macros gcc ncurses-devel python-ctypes python-sphinx10 \
      redhat-rpm-config

Now follow through the Common Steps part below.

Preparation steps for CentOS 6.x (only)

You'll need EPEL installed first and some CentOS specific packages. The commands below will get that done for you. After that, follow through the "Common steps" section.

​1. Install EPEL first:

    $ sudo yum -y install https://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

​2. Install the packages required only on CentOS:

    $ sudo yum -y install python-webob1.0 python-paste-deploy1.5 python-sphinx10 redhat-rpm-config

Now follow through the Common Steps part below.

Preparation steps for RHEL 6.x (only)

You'll need EPEL installed first and some RHEL specific packages. The 2 commands below will get that done for you. After that, follow through the "Common steps" section.

​1. Install EPEL first:

    $ sudo yum -y install https://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

​2. Install the packages required only on RHEL:

    $ sudo yum -y --enablerepo=rhel-6-server-optional-rpms install python-webob1.0 \
      python-paste-deploy1.5 python-sphinx10 redhat-rpm-config

Now follow through the Common Steps part below.

Common Steps

These steps are for both Fedora and RHEL/CentOS. At the end you'll have the complete set of GlusterFS RPMs for your platform, ready to be installed.

NOTES for step 1 below:

  • If you're on RHEL/CentOS 5.x and get a message about lvm2-devel not being available, it's ok. You can ignore it. :)
  • If you're on RHEL/CentOS 6.x and get any messages about python-eventlet, python-netifaces, python-sphinx and/or pyxattr not being available, it's ok. You can ignore them. :)

​1. Install the needed packages

    $ sudo yum -y --disablerepo=rhs* --enablerepo=*optional-rpms install git autoconf \
      automake bison cmockery2-devel dos2unix flex fuse-devel glib2-devel libaio-devel \
      libattr-devel libibverbs-devel librdmacm-devel libtool libxml2-devel lvm2-devel make \
      openssl-devel pkgconfig pyliblzma python-devel python-eventlet python-netifaces \
      python-paste-deploy python-simplejson python-sphinx python-webob pyxattr readline-devel \
      rpm-build systemtap-sdt-devel tar libcmocka-devel

​2. Clone the GlusterFS git repository

    $ git clone https://review.gluster.org/glusterfs
    $ cd glusterfs

​3. Choose which branch to compile

If you want to compile the latest development code, you can skip this step and go on to the next one.

If instead you want to compile the code for a specific release of GlusterFS (such as v3.4), get the list of release names here:

    $ git branch -a | grep release
      remotes/origin/release-2.0
      remotes/origin/release-3.0
      remotes/origin/release-3.1
      remotes/origin/release-3.2
      remotes/origin/release-3.3
      remotes/origin/release-3.4
      remotes/origin/release-3.5

Then switch to the correct release using the git "checkout" command, and the name of the release after the "remotes/origin/" bit from the list above:

    $ git checkout release-3.4

NOTE - The CentOS 5.x instructions have only been tested for the master branch in GlusterFS git. It is unknown (yet) if they work for branches older then release-3.5.

​4. Configure and compile GlusterFS

Now you're ready to compile Gluster:

    $ ./autogen.sh
    $ ./configure --enable-fusermount
    $ make dist

​5. Create the GlusterFS RPMs

    $ cd extras/LinuxRPM
    $ make glusterrpms

That should complete with no errors, leaving you with a directory containing the RPMs.

    $ ls -l *rpm
    -rw-rw-r-- 1 jc jc 3966111 Mar  2 12:15 glusterfs-3git-1.el5.centos.src.rpm
    -rw-rw-r-- 1 jc jc 1548890 Mar  2 12:17 glusterfs-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc   66680 Mar  2 12:17 glusterfs-api-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc   20399 Mar  2 12:17 glusterfs-api-devel-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc  123806 Mar  2 12:17 glusterfs-cli-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc 7850357 Mar  2 12:17 glusterfs-debuginfo-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc  112677 Mar  2 12:17 glusterfs-devel-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc  100410 Mar  2 12:17 glusterfs-fuse-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc  187221 Mar  2 12:17 glusterfs-geo-replication-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc  299171 Mar  2 12:17 glusterfs-libs-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc   44943 Mar  2 12:17 glusterfs-rdma-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc  123065 Mar  2 12:17 glusterfs-regression-tests-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc   16224 Mar  2 12:17 glusterfs-resource-agents-3git-1.el5.centos.x86_64.rpm
    -rw-rw-r-- 1 jc jc  654043 Mar  2 12:17 glusterfs-server-3git-1.el5.centos.x86_64.rpm